This thing is driving me nuts! Argh!
All right, I'm in Nero, v5.5.1.8. I followed the instructions from Dr. Zoidberg's topics on how to get the files ready for burning perfectly. The burning is the only part I'm having trouble with. Anywho, I took the wizard, and told it to compile a data CD. It told me to drag and drop the files I wanted to burn, so I did. Then, I went to File and Burn Image. I opened NesterDC5.0Nero.nrg, from the .zip file for Nester DC 5.0. It brought me to a three-tab menu, the tabs being Info, Misc, and Burn. I went to Info, and for some reason, the two tracks read like this:
1 CD-Rom Mode2/XA 2 MB (2,508 KB)
2 ISO 9660 Mode2/XA 1 MB (685 KB)
I'm pretty sure this is not how it's supposed to be. Anway, I went on to Burn. The Write and Finalize CD boxes were checked, yet for the Write Speed box, every selection was completely blank! Agh! I told it to write, and it showed me the only available recording device, Image Recorder. I hit OK, and it minimized. Then, a large box popped up, and it asked me to save the .nrg file. So I did, and it went through the burning process. A pop-up message appeared, saying "Burnprocess done successfully." So I hit OK, then hit Discard, and was back into the original window. I closed out, and looked at the D:\ drive with My Computer . . . just to find it EMPTY!!! Grr! What am I doing wrong?
I need help with NesterDC burning! Agh!
-
- DCEmu Newbie
- Posts: 5
- https://www.artistsworkshop.eu/meble-kuchenne-na-wymiar-warszawa-gdzie-zamowic/
- Joined: Sat Mar 02, 2002 10:57 am
- Has thanked: 0
- Been thanked: 0
this should do it
try extracting the file in a new folder somewhere on your harddrive. then doubleclick the extracted file, and nero should open up and have a window pop up asking if you want to burn the image. click yes. not much more to it than that. i did it a couple days ago just like that.
-
- The Filth
- Posts: 1181
- Joined: Wed Oct 17, 2001 7:44 pm
- Has thanked: 0
- Been thanked: 0
- butters
- Classic Games Lover
- Posts: 5088
- Joined: Fri Feb 08, 2002 6:50 pm
- Location: Lubbock, Texas, United States, Sol 3, Milky Way Galaxy
- Has thanked: 0
- Been thanked: 0
Looks like you may have an unsupported burner and its not detecting it. The image recorder just makes a burnable image out of files.barakao1 wrote:This thing is driving me nuts! Argh!
All right, I'm in Nero, v5.5.1.8. I followed the instructions from Dr. Zoidberg's topics on how to get the files ready for burning perfectly. The burning is the only part I'm having trouble with. Anywho, I took the wizard, and told it to compile a data CD. It told me to drag and drop the files I wanted to burn, so I did. Then, I went to File and Burn Image. I opened NesterDC5.0Nero.nrg, from the .zip file for Nester DC 5.0. It brought me to a three-tab menu, the tabs being Info, Misc, and Burn. I went to Info, and for some reason, the two tracks read like this:
1 CD-Rom Mode2/XA 2 MB (2,508 KB)
2 ISO 9660 Mode2/XA 1 MB (685 KB)
I'm pretty sure this is not how it's supposed to be. Anway, I went on to Burn. The Write and Finalize CD boxes were checked, yet for the Write Speed box, every selection was completely blank! Agh! I told it to write, and it showed me the only available recording device, Image Recorder. I hit OK, and it minimized. Then, a large box popped up, and it asked me to save the .nrg file. So I did, and it went through the burning process. A pop-up message appeared, saying "Burnprocess done successfully." So I hit OK, then hit Discard, and was back into the original window. I closed out, and looked at the D:\ drive with My Computer . . . just to find it EMPTY!!! Grr! What am I doing wrong?
Look at the list at http://www.nero.com/en/recorder.htm for supported drives and http://www.nero.com/en/firmware.htm to update your drivers.