a "dream" come true..then smashed!

[MerkK]

okay.. im a big dreamsnes fan. but, unfortunately my burner is the worst one out MITSUMI..(everyone laugh).. it doesnt burn self boot images or anything self boot... im asking ANYONE.. just ANYONE to give me instructions on how to burn Dreamsnes 0.9.5 so i can boot it up with the ol' utopE!(utopia bootdisk)
thankyoukindly
Merk

________________________________
chrono: im getting tired god demmit!

[Jindujun]

go to page 2 and read the topic called : Selfbooting DreamSNES 0.9.5 with DSSBS Final
if u do what that says, u'll be able to burn a working Dreamsnes 0.9.5

[MerkK]

negative.....ive tried it all .. i need to make it non-self-boot..

[sixteen-bit]

You need to assemble the files as shown in the above tutorial but instead of self-booting the disc you burn the contents of the "new" folder onto a standard data disc.
Ie. the contents of the "new" folder would be in the root dir of the data CD.

[ZacMc]

negative.....ive tried it all .. i need to make it non-self-boot..

DESCRAMBLE the 1dsnes.sh4 file and then burn all the DSNES files (1dsnes.sh4, ip.bin, /sound, /local, /gfx, /roms) onto a cd MODE-1.

-Zac

[discostu55555]

zacmans right, but also be sure to rename 1dsnes.sh4 to 1st_read.bin or the boot disc might get confused...

[bkcomic]

Wouldn't the 1st_read.sh4 need to be unscrambled, as well? I can't remember which format utopia reads...

[MerkK]

hmm... can someone write instructions on this post? im sorry if im asking too much. ..

[discostu55555]

ok, here we go:

1. get the plainfiles release of dsnes and unzip it wherever
2. put dcscram.exe in the "cd" folder of dsnes (get it here: http://dev.dcemulation.org/files/devtoo ... cscram.zip )
3. copy and paste the following into a blank text file also in the "cd" folder and rename it to whatever.bat:

Code: Select all

dcscram -d 1dsnes.sh4 1st_read.bin
del *.sh4
del *.exe
del *.bat

now open the .bat file and it will convert the file... now burn the entire contents of the "cd" folder (not the folder itself, just the files) onto a mode1 disc (your roms will go in a roms folder by the way)..have fun

[MerkK]

so i can just click new- then notepad file and put the code in ? i did that then what? i dont know what to do any further?.... sorry if im comming off as a major newbie... i opened the dos file and it just dissapears

[ZacMc]

so i can just click new- then notepad file and put the code in ? i did that then what? i dont know what to do any further?.... sorry if im comming off as a major newbie... i opened the dos file and it just dissapears

If you downloaded the Descramble kit that I posted a link to earlier just click on scramble.bat and press 2 to descramble then type in 1dsnes.sh4 press enter and it is descrambled.

-Zac

[Lilmuckers]

you mean the scramble kit from

http://www.spider-console.co.uk/addon

right? sounds like my kit

[MerkK]

...whenever i press 2....it continues on and says "bad command" and stuff like that ALTHOUGH it says it did it successfully i didnt even enter a file name

[ZacMc]

you mean the scramble kit from

http://www.spider-console.co.uk/addon

right? sounds like my kit

Yep thats the one.

[JuniorCrb]

[quote="discostu55555"]
ok, here we go:

1. get the plainfiles release of dsnes and unzip it wherever
2. put dcscram.exe in the "cd" folder of dsnes (get it here: http://dev.dcemulation.org/files/devtoo ... cscram.zip )
3. copy and paste the following into a blank text file also in the "cd" folder and rename it to whatever.bat:
[code]
dcscram -d 1dsnes.sh4 1st_read.bin
del *.sh4
del *.exe
del *.bat
[/code]
now open the .bat file and it will convert the file... now burn the entire contents of the "cd" folder (not the folder itself, just the files) onto a mode1 disc (your roms will go in a roms folder by the way)..have fun
[/quote]

tried it no luck any help please