Laser Calibration

VillageIdiot · Post by **VillageIdiot** » Mon Feb 24, 2003 9:41 pm

I'm thinking about giving it a try, my DC has been giving me trouble reading a few of my games lately (Sega GT and Grandia 2)

VillageIdiot · Post by **VillageIdiot** » Mon Feb 24, 2003 9:46 pm

What type of screws are in the DC? They look like allen heads, or something like that.

Skater_dusto · Post by **Skater_dusto** » Tue Feb 25, 2003 12:13 am

Well if you decide to bust 'er open, make sure you know where everything is and don't move stuff around if you don't need to. I recommend doing it in a clean room(no dust) and have a can of compressed air on hand.

VillageIdiot · Post by **VillageIdiot** » Wed Feb 26, 2003 11:45 am

Has anyone here done this? I'm gonna do it (the laser calibration

) this weekend, right after I find the right size torx bit.

bizzle · Post by **bizzle** » Wed Feb 26, 2003 2:00 pm

The screwes are normal phillips screws

should be moved to hardware

skedar99 · Post by **skedar99** » Fri Feb 28, 2003 5:16 am

when i was calabraiting my lazer unit and there is a easier way. If you look at the actual lazer block you will see a small screw if you move it very slightly you change the focus a little. keep moving slightly and testing till you have it recalabraited!!!

Laser Calibration

Laser Calibration

easy way to caliberate DC lazers