Visual Troy Advance 1.4
-
- DCEmu.co.uk Webmaster
- Posts: 1184
- https://www.artistsworkshop.eu/meble-kuchenne-na-wymiar-warszawa-gdzie-zamowic/
- Joined: Wed Oct 17, 2001 7:44 pm
- Location: notts ,england
- Has thanked: 0
- Been thanked: 0
- Contact:
Visual Troy Advance 1.4
This is Metafoxes newspost :
Visual Troy Advance, GPF's port of the Gameboy Advance emulator, Visualboy Advance, to the Dreamcast has been updated. This version is based on the 1.8.0 CVS sourcecode, and while it doesn't improve upon the speed of the emulator, it improves upon the compatibility.
http://gpf.dcemu.co.uk/
Visual Troy Advance, GPF's port of the Gameboy Advance emulator, Visualboy Advance, to the Dreamcast has been updated. This version is based on the 1.8.0 CVS sourcecode, and while it doesn't improve upon the speed of the emulator, it improves upon the compatibility.
http://gpf.dcemu.co.uk/
Webmaster of DCEmu
The Homebrew and Gaming Network Covering All Consoles.
The Homebrew and Gaming Network Covering All Consoles.
-
- Mental DCEmu
- Posts: 303
- Joined: Tue Jun 29, 2004 4:20 pm
- Location: Colorado
- Has thanked: 0
- Been thanked: 0
- Contact:
- Christuserloeser
- Moderator
- Posts: 5948
- Joined: Thu Aug 28, 2003 12:16 am
- Location: DCEvolution.net
- Has thanked: 10 times
- Been thanked: 0
- Contact:
http://www.boob.co.uk/devtools.htmlIP.BIN replacement
Released: 15-Jan-2002
By: LiENUS
Info: This as far as I know is the first LEGAL ip.bin replacement for the dc, however it is pretty much untested, so far it has been tested with the following:
DCfloys, Wolf3D/DC, PAL Enforcer, and dcload (serial).
This IP.BIN is intended to replace the one from Sega and make it closer to being legal, there are 3 bootstraps in IP.BIN, the Sega one, boostrap #1, and bootstrap #2. The Sega one CANT be replaced, and is the only one remaining in the latest release.
Download Local Copy: ipfull.tgz (latest)
Download Local Copy: ipsmall.tgz (1st release)
Insane homebrew collector.
-
- DCEmu Super Poster
- Posts: 1342
- Joined: Thu Aug 26, 2004 4:05 am
- Has thanked: 0
- Been thanked: 0
- Contact:
Do not use DAO Nero images. It seems as if any version of Nero 6.0 or higher are compatible with TAO mode images and most of them (FWIK the only version above 6.0 is 6.3 that supports DAO images) do not support DAO images.
If the image was a pre-made image you can use Alcohol 120% to burn the image. Just do not change any settings, besides your burning speed.
The newer versions of DiscJuggler now support Nero images, so you can even try that. Just beware that it isn't widely tested and isn't known if it works or not.
Your best bet is to burn a CDI image (DiscJuggler) with Alcohol 120%. Again do not change any settings besides your burning speed. It never fails for me.
http://www.consolevision.com/members/fa ... ning.shtml
If the image was a pre-made image you can use Alcohol 120% to burn the image. Just do not change any settings, besides your burning speed.
The newer versions of DiscJuggler now support Nero images, so you can even try that. Just beware that it isn't widely tested and isn't known if it works or not.
Your best bet is to burn a CDI image (DiscJuggler) with Alcohol 120%. Again do not change any settings besides your burning speed. It never fails for me.
http://www.consolevision.com/members/fa ... ning.shtml
I am using Nero 5. DAO image is how I got my NesterDC to work.
I will try making a CDI image and burning it with Alcohol.
I tried making a CDI image for Dreamsnes and burned it with alcohol but I got the reseting problem (see other thread)
EDIT-now when I try making a CDI image with selfboot, it says the file is invalid or doesn't exist.
I will try making a CDI image and burning it with Alcohol.
I tried making a CDI image for Dreamsnes and burned it with alcohol but I got the reseting problem (see other thread)
EDIT-now when I try making a CDI image with selfboot, it says the file is invalid or doesn't exist.
Yeah, I got it to work, thanks. Now I have another problem though, heh.
I selected load rom (I only put one rom on...just to test it) and I selected the rom. It loads but then it just comes up with a blank white box and nothing happens.
One more thing, could you check out Mugen's thread on the Dreamsnes board? Thanks.
I selected load rom (I only put one rom on...just to test it) and I selected the rom. It loads but then it just comes up with a blank white box and nothing happens.
One more thing, could you check out Mugen's thread on the Dreamsnes board? Thanks.
-
- DC Developer
- Posts: 529
- Joined: Wed Oct 17, 2001 7:44 pm
- Location: Texas
- Has thanked: 0
- Been thanked: 0
- Contact:
which rom? A couple of roms that I have found that didn't work, did the same thing, they work fine in the windows port though so its either something in my port or just the way its compiled thats breaking it.Hairygoat wrote:Yeah, I got it to work, thanks. Now I have another problem though, heh.
I selected load rom (I only put one rom on...just to test it) and I selected the rom. It loads but then it just comes up with a blank white box and nothing happens.
One more thing, could you check out Mugen's thread on the Dreamsnes board? Thanks.
Troy