Lunkin's Journey updates
-
- Raptors Creator
- Posts: 300
- https://www.artistsworkshop.eu/meble-kuchenne-na-wymiar-warszawa-gdzie-zamowic/
- Joined: Mon Mar 11, 2002 11:56 am
- Has thanked: 0
- Been thanked: 0
Lunkin's Journey updates
Started a new thread, 'cos the original got swamped with a load of bo&*^cks, that I wouldn't want to keep reading through.
Anyway:
Some new screenshots:
Click for bigger ones. That's the second level, just done a rebuild of it, 'cos the first build was sluggish to say the least. Therefore I replaced some expanses of space with "cliffs" and the r_speeds are slightly better. It looks worse but plays better, well smoother at least.
I've lit it, and I've now just gotta populate it and sort out some movement related code, and it'll be onto to level 3
Anyway:
Some new screenshots:
Click for bigger ones. That's the second level, just done a rebuild of it, 'cos the first build was sluggish to say the least. Therefore I replaced some expanses of space with "cliffs" and the r_speeds are slightly better. It looks worse but plays better, well smoother at least.
I've lit it, and I've now just gotta populate it and sort out some movement related code, and it'll be onto to level 3
- vicviper74
- Modder Of Rage
- Posts: 660
- Joined: Mon Nov 05, 2001 8:52 am
- Location: nonya
- Has thanked: 0
- Been thanked: 0
- Contact:
-
- QuakeDev Mod
- Posts: 1233
- Joined: Wed Oct 17, 2001 7:44 pm
- Location: Indpls, IN USA
- Has thanked: 0
- Been thanked: 0
- Contact:
Vic:
You'd need to open up the pak0.pak and rename maps\spid.bsp to maps\start.bsp
Or if you've hacked together a USB adaptor you can use a usb keyboard to type "map spid.bsp" in the console (w/o quotes)
Then after you get tired of that map you'll have to go back and edit the pak again... this time changing start.bsp back to spid.bsp and renameing racete.bsp to start.bsp
As per the readme... win the race and racete restarts... loose the race and you have an option to go to the next level.
And dont forget... the reason it is only three levels and why you have to go through this trouble to play them is that all that has been released is an early test demo. I'm sure Ajay will be making a proper start/into in some later release.
Another thing... out of curiosity...
Are you using the original release of QuakeX or the one with updated menus, onlinesupport, etc?
You'd need to open up the pak0.pak and rename maps\spid.bsp to maps\start.bsp
Or if you've hacked together a USB adaptor you can use a usb keyboard to type "map spid.bsp" in the console (w/o quotes)
Then after you get tired of that map you'll have to go back and edit the pak again... this time changing start.bsp back to spid.bsp and renameing racete.bsp to start.bsp
As per the readme... win the race and racete restarts... loose the race and you have an option to go to the next level.
And dont forget... the reason it is only three levels and why you have to go through this trouble to play them is that all that has been released is an early test demo. I'm sure Ajay will be making a proper start/into in some later release.
Another thing... out of curiosity...
Are you using the original release of QuakeX or the one with updated menus, onlinesupport, etc?
My old Sig was broken. Enter the new Sig!
- Arqueiro
- DCEmu Nutter
- Posts: 785
- Joined: Tue Jul 02, 2002 9:29 am
- Has thanked: 0
- Been thanked: 0
- Contact:
nice shoots man ! keep up this nice work
3d graphics and visualization ?
http://www.arquiteturadigital.com
http://www.arquiteturadigital.com
Info: just tried it with radquake, and well it sucks, pretty much how it does with winquake, but much worse.
The main problem is the 2nd and 3rd levels, which are pretty huge and just eat up ram; none of the ground textures are displayed, and it crawls to 5 fps at times.
I shan't get into any discussion re: engine - mods, but I doubt if the mod will play with dreamcast. I'll try it with the (original, titanium) DCQuake, just to see "if it's possible"
I'm really not going to split levels so they work in dcquake. I must confess I only get a decent framerate on a 1.5gig pc, so I'm aiming it at that.
Who knows. Maybe things will change.
The main problem is the 2nd and 3rd levels, which are pretty huge and just eat up ram; none of the ground textures are displayed, and it crawls to 5 fps at times.
I shan't get into any discussion re: engine - mods, but I doubt if the mod will play with dreamcast. I'll try it with the (original, titanium) DCQuake, just to see "if it's possible"
I'm really not going to split levels so they work in dcquake. I must confess I only get a decent framerate on a 1.5gig pc, so I'm aiming it at that.
Who knows. Maybe things will change.
- Arqueiro
- DCEmu Nutter
- Posts: 785
- Joined: Tue Jul 02, 2002 9:29 am
- Has thanked: 0
- Been thanked: 0
- Contact:
so bad, do you got the same problem on winquake ?
3d graphics and visualization ?
http://www.arquiteturadigital.com
http://www.arquiteturadigital.com
Yeah, winquake is messed up.
The levels concerned are 2.7mb and 2.8mb.
I tried it with titanium's quake and well, they didn't even load. However the first level and did and I'd forgotten how good quake looked in that port.
So where does that leave Lunkin & Dreamcast quake? Well, I may have a go at simplifying the problem levels, but for 2 reasons:
- I basically suck at mapping
- The level needs to be what it is (if that makes sense)
I'm not sure whether or not I'll find a solution.
The levels concerned are 2.7mb and 2.8mb.
I tried it with titanium's quake and well, they didn't even load. However the first level and did and I'd forgotten how good quake looked in that port.
So where does that leave Lunkin & Dreamcast quake? Well, I may have a go at simplifying the problem levels, but for 2 reasons:
- I basically suck at mapping
- The level needs to be what it is (if that makes sense)
I'm not sure whether or not I'll find a solution.
-
- QuakeDev Respected
- Posts: 592
- Joined: Thu Mar 14, 2002 1:15 am
- Has thanked: 0
- Been thanked: 6 times
ajay you could use worldcraft's 'toggle texture application', select the sides of a wall that aren't visible and scale them, say by 1000. This will make the mapsize smaller without making them look worse.
Create your own Dreamcast games using the Quake-Engine:
http://quakedev.dcemulation.org/develop/getstarted.htm
http://quakedev.dcemulation.org/develop/getstarted.htm
-
- QuakeDev Respected
- Posts: 592
- Joined: Thu Mar 14, 2002 1:15 am
- Has thanked: 0
- Been thanked: 6 times
thanks
Here a thread that might be interesting:
http://www.dcemulation.org/phpBB/viewtopic.php?t=34934
Here a thread that might be interesting:
http://www.dcemulation.org/phpBB/viewtopic.php?t=34934
Create your own Dreamcast games using the Quake-Engine:
http://quakedev.dcemulation.org/develop/getstarted.htm
http://quakedev.dcemulation.org/develop/getstarted.htm
- not just souLLy now
- DCEmu Respected
- Posts: 4070
- Joined: Sun Jun 13, 2004 5:53 pm
- Location: UK
- Has thanked: 2 times
- Been thanked: 3 times
Just a quick update, got Lunkin working with winquake with only 2 very brief moments of texture-blacking-out, which really doesn't spolil things. It's now completely playable. I've not tested with RadQuake as I've no cdr's.
First 3 levels are done and dusted. Another new code feature is done, thanks to Wazat at I3d, and I'm well into making level four.
Lots to do, so I'm off.
ajay
First 3 levels are done and dusted. Another new code feature is done, thanks to Wazat at I3d, and I'm well into making level four.
Lots to do, so I'm off.
ajay
- Zealous zerotype
- zerotype
- Posts: 3701
- Joined: Wed Aug 13, 2003 7:11 pm
- Location: Nashville,TN
- Has thanked: 0
- Been thanked: 0