50/60hz Switch (RePost)
-
- DCEmu Newbie
- Posts: 9
- https://www.artistsworkshop.eu/meble-kuchenne-na-wymiar-warszawa-gdzie-zamowic/
- Joined: Thu Nov 08, 2001 5:12 am
- Has thanked: 0
- Been thanked: 0
- Contact:
50/60hz Switch (RePost)
PAL/NTSC Conversion Tutorial
Tools Needed:
Two Wires
Soldering Iron
Steady Hand
Patience
And a Dreamcast (Soz just had to put that in)
Instructions:
Take everything out of your Dreamcast until you get to the motherboard.
Now underneath the Motherboard near the TV Out Connector, There will be a bridge (R422), Solder this bridge together to force the DC to run at 60hz PAL.
If for any reason you need NTSC then you can just solder a switch here
Enjoy
BOB_LORDOFEVIL
Tools Needed:
Two Wires
Soldering Iron
Steady Hand
Patience
And a Dreamcast (Soz just had to put that in)
Instructions:
Take everything out of your Dreamcast until you get to the motherboard.
Now underneath the Motherboard near the TV Out Connector, There will be a bridge (R422), Solder this bridge together to force the DC to run at 60hz PAL.
If for any reason you need NTSC then you can just solder a switch here
Enjoy
BOB_LORDOFEVIL
-
- DCEmu Newbie
- Posts: 9
- Joined: Thu Nov 08, 2001 5:12 am
- Has thanked: 0
- Been thanked: 0
- Contact:
Dam the picture wont shot.
Just type "http://www.geocities.com/dcmod2000/ntsc ... ersion.jpg" in the Address Bar and it will come up
BOB
Just type "http://www.geocities.com/dcmod2000/ntsc ... ersion.jpg" in the Address Bar and it will come up
BOB
-
- DCEmu Newbie
- Posts: 1
- Joined: Mon Nov 04, 2002 8:04 am
- Has thanked: 0
- Been thanked: 0
- az_bont
- Administrator
- Posts: 13567
- Joined: Sat Mar 09, 2002 8:35 am
- Location: Swansea, Wales
- Has thanked: 0
- Been thanked: 0
- Contact:
Most games give you the option of outputting a PAL60 signal, but the default is 50Hz.
Sick of sub-par Dreamcast web browsers that fail to impress? Visit Psilocybin Dreams!
- az_bont
- Administrator
- Posts: 13567
- Joined: Sat Mar 09, 2002 8:35 am
- Location: Swansea, Wales
- Has thanked: 0
- Been thanked: 0
- Contact:
On an NTSC console, PAL games apparently skip the refresh rate setting screen and default to 60Hz, which would be outputted as an NTSC signal.Vchat20 wrote:az_bont, are you referring to PAL DC's or all of them? cuz my NTSC DC has always worked fine with my tv, unfortunately, the only game i have that allows me to switch refresh rates is MSR. and 50hz doesnt work. only 60hz. if that is the case, wtf?
sorry, just a bit confused by your post az_bont.
Sick of sub-par Dreamcast web browsers that fail to impress? Visit Psilocybin Dreams!
-
- Psychotic DCEmu
- Posts: 746
- Joined: Tue Mar 26, 2002 11:59 pm
- Location: the internet
- Has thanked: 0
- Been thanked: 0
- Matisfaction
- I can't get no.....
- Posts: 3429
- Joined: Sat Jul 17, 2004 8:44 pm
- Has thanked: 0
- Been thanked: 0
This is a Pal fix mod for NTSC machines that have graphical problems with some PAL games with the Older Version of the 4 Wire mod chip, Or a boot disc.
Link
Link
-
- Psychotic DCEmu
- Posts: 746
- Joined: Tue Mar 26, 2002 11:59 pm
- Location: the internet
- Has thanked: 0
- Been thanked: 0
Must've been the default date when the forum was reset (or something like that) about a year or two ago.
As for bumping this in general, I think it's because Vodooo asked about it in this post
( http://www.dcemulation.org/phpBB/viewtopic.php?t=64905 ).
As for bumping this in general, I think it's because Vodooo asked about it in this post
( http://www.dcemulation.org/phpBB/viewtopic.php?t=64905 ).