Chankast command line
-
- DC Developer
- Posts: 24
- https://www.artistsworkshop.eu/meble-kuchenne-na-wymiar-warszawa-gdzie-zamowic/
- Joined: Sat Dec 06, 2003 11:23 pm
- Location: Here, There, Everywhere
- Has thanked: 0
- Been thanked: 0
- Contact:
- Stef.D
- DCEmu Respected
- Posts: 114
- Joined: Wed Oct 15, 2003 1:46 am
- Has thanked: 0
- Been thanked: 0
- Contact:
Ok, so i just have a standalone ELF file (including romdisk) to test, what command i should use to convert it to bin ?Vorrtexx wrote: Well when you are compiling your program, you can just add an extra line or so to the Makefile that will convert the ELF to BIN for you. And if you have no external files, Chanka can run the standalone BIN file for you. The ISO is only needed if you have files other than the main executable.
Sorry, I didn't make that clear in my earlier post
thanks
-
- Insane DCEmu
- Posts: 138
- Joined: Sun Apr 06, 2003 5:29 am
- Has thanked: 0
- Been thanked: 0
- Contact:
well you could add this to your Makefile (Where TARGET is the name of the output filename:
$(TARGET).bin : $(TARGET).elf
$(KOS_OBJCOPY) -v -O binary $(TARGET).elf $(TARGET).bin
and you may need to change the "all" to this:
all: rm-elf $(TARGET).bin
or if you want to do it manually:
$(KOS_OBJCOPY) -v -O binary $(TARGET).elf $(TARGET).bin
Where TARGET is the name of your elf/bin file to output.
$(TARGET).bin : $(TARGET).elf
$(KOS_OBJCOPY) -v -O binary $(TARGET).elf $(TARGET).bin
and you may need to change the "all" to this:
all: rm-elf $(TARGET).bin
or if you want to do it manually:
$(KOS_OBJCOPY) -v -O binary $(TARGET).elf $(TARGET).bin
Where TARGET is the name of your elf/bin file to output.
-
- DCEmu Super Poster
- Posts: 1434
- Joined: Wed Jan 29, 2003 10:15 pm
- Location: At the end of the stage with a MASSIVE arsenal!
- Has thanked: 0
- Been thanked: 0
- Contact:
All I have to say, is thank for for the great emulator. The speed is GREAT! The ONLY con I have is the 2 texturing. In the 3 versions of the program, either the 2D stuff is there with scrambled 3D stuff, or the 3D stuff is perfect and there's no 2D stuff, lmao. Keep up the good work. You know? You should get a badge in DCEMU for your contributions. Thanks agian. I hope that Soul Calibur will be supported someday... Good luck!
Spreading his inquiries all over the net!
<^_^>
-
- DCEmu Uncool Newbie
- Posts: 1459
- Joined: Sat Dec 27, 2003 10:40 pm
- Has thanked: 0
- Been thanked: 0
- Contact:
Christuserloeser wrote:Doesn't matter if homebrew or not. Everything that's legal can be tested. Bleem!cast is sth that I'd not consider as 'homebrew' too though it can't be loaded with the current release of Chanka, but maybe with the next version as one of the author announced.speud wrote:also i noticed "dreamkey 3" was mentionned in the list of homebrews tested with chanka, although its not a homebrew.
There are MP3 and VCD player available at Lik-Sang that could be tested too as they are released as normal CDs...
Chris
also i dont know what you mean by it being legal.wraggster wrote:Chanka Compatibility Chart: (Homebrew Only)
do you mean to download dk3's iso would be legal according to you? if so its not.
and its also strange to see the paradox of dcemu.co.uk's that forbids links to official dc browsers' rips in its rules, while it considers they are homebrew in the chankast compatibility list
-
- Insane DCEmu
- Posts: 138
- Joined: Sun Apr 06, 2003 5:29 am
- Has thanked: 0
- Been thanked: 0
- Contact:
Sometimes the emu will lock up.
Sometimes it will appear it's running, as in the FPS are continuously counting, but no image is displaying.
Sometimes they will boot, and maybe trying to start them the emu will just stop responding.
and with most SDL apps I tested, they will lock up about 2 - 3 seconds and display this black mouse arrow cursor in the top left corner of the display window.
Sometimes it will appear it's running, as in the FPS are continuously counting, but no image is displaying.
Sometimes they will boot, and maybe trying to start them the emu will just stop responding.
and with most SDL apps I tested, they will lock up about 2 - 3 seconds and display this black mouse arrow cursor in the top left corner of the display window.
- Christuserloeser
- Moderator
- Posts: 5948
- Joined: Thu Aug 28, 2003 12:16 am
- Location: DCEvolution.net
- Has thanked: 10 times
- Been thanked: 0
- Contact:
@speud:
IMO it's the only true Compatibility Chart because all other stuff is pressed on GDs and therefor not readable with an ordinary CD/DVD drive.If there ever should be a really positive effect for the scene with Chanka's release then the one that it could help testing and debugging homebrew productions and the only way we all could help to improve Chanka for that would be to actually test available homebrew with it so it could be improved for the needs of a DC devver.
Also it isn't really helpful to say "Ikaruga runs perfectly without any flaws" or something similar cause it will only be a 'What should I download first?'-FAQ for the Warez community.
I am not sure if most CD releases would work with Chanka, the Bleem!cast packs currently won't.
Chris
Visit http://www.DCEmu.co.uk ... I've never said that I'd like to consider it a homebrew only Compatibility Chart.speud wrote:wraggster wrote:Chanka Compatibility Chart: (Homebrew Only)
IMO it's the only true Compatibility Chart because all other stuff is pressed on GDs and therefor not readable with an ordinary CD/DVD drive.If there ever should be a really positive effect for the scene with Chanka's release then the one that it could help testing and debugging homebrew productions and the only way we all could help to improve Chanka for that would be to actually test available homebrew with it so it could be improved for the needs of a DC devver.
Also it isn't really helpful to say "Ikaruga runs perfectly without any flaws" or something similar cause it will only be a 'What should I download first?'-FAQ for the Warez community.
Why necessarily downloading it? Isn't that thing available as an ordinary CD (= not as GD)? If so it'd be np to check it with Chanka otherwise I'll have to excuse me for this big mistakespeud wrote:also i dont know what you mean by it being legal.
do you mean to download dk3's iso would be legal according to you? if so its not.
see abovespeud wrote:and its also strange to see the paradox of dcemu.co.uk's that forbids links to official dc browsers' rips in its rules, while it considers they are homebrew in the chankast compatibility list
speud wrote:Christuserloeser wrote:There are MP3 and VCD player available at Lik-Sang that could be tested too as they are released as normal CDs...
I am not sure if most CD releases would work with Chanka, the Bleem!cast packs currently won't.
Chris
Insane homebrew collector.
- Christuserloeser
- Moderator
- Posts: 5948
- Joined: Thu Aug 28, 2003 12:16 am
- Location: DCEvolution.net
- Has thanked: 10 times
- Been thanked: 0
- Contact:
-
- Soul Sold for DCEmu
- Posts: 4865
- Joined: Fri Jul 11, 2003 9:56 pm
- Has thanked: 2 times
- Been thanked: 4 times
Knowing SDL well if it does display the mouse pointer, it has started and did load. But it sounds like it did not find, the files or paths to the files of the app game emu.Vorrtexx wrote:Sometimes the emu will lock up.
Sometimes it will appear it's running, as in the FPS are continuously counting, but no image is displaying.
Sometimes they will boot, and maybe trying to start them the emu will just stop responding.
and with most SDL apps I tested, they will lock up about 2 - 3 seconds and display this black mouse arrow cursor in the top left corner of the display window.
Black screen with the pointer most times means wrongs paths or some how the paths to the files it needs are not geting found.
I would try the iso trick you did to make the others work on a simple SDL app like the one i did to display a bmp or jpg. And the mirror kos example in the same style both are on my site under development.
Dreamcast forever!!!
-
- Soul Sold for DCEmu
- Posts: 4865
- Joined: Fri Jul 11, 2003 9:56 pm
- Has thanked: 2 times
- Been thanked: 4 times
-
- DCEmu Uncool Newbie
- Posts: 1459
- Joined: Sat Dec 27, 2003 10:40 pm
- Has thanked: 0
- Been thanked: 0
- Contact:
this is not a debate about the legality of some isos. dk3 is not homebrew and has to be ripped to be runned with chankast, so thats why i pointed it shouldnt be in a homebrew list.SegaGamer wrote:sorry to break the news to you but by downloading/copying Dreamkey 3.0 actually saves sega money. Dreamkey was given away by SEGA to those who owned a dreamcast and emailed them, as dreamkey 3.0 is not sold in any shop (never was, never will).
now dk3 is a commercial product, it is given for free to european people in a commercial strategy, the day it will cost something to sega they will simply stop sending them.
if you start to legitimate this one youll get some people claiming you help sega when you distribute sonic's iso because sega dont make any money on it anymore, then it will be another game, etc.
- Stef.D
- DCEmu Respected
- Posts: 114
- Joined: Wed Oct 15, 2003 1:46 am
- Has thanked: 0
- Been thanked: 0
- Contact:
ThanksVorrtexx wrote:well you could add this to your Makefile (Where TARGET is the name of the output filename:
$(TARGET).bin : $(TARGET).elf
$(KOS_OBJCOPY) -v -O binary $(TARGET).elf $(TARGET).bin
and you may need to change the "all" to this:
all: rm-elf $(TARGET).bin
or if you want to do it manually:
$(KOS_OBJCOPY) -v -O binary $(TARGET).elf $(TARGET).bin
Where TARGET is the name of your elf/bin file to output.
-
- Soul Sold for DCEmu
- Posts: 4865
- Joined: Fri Jul 11, 2003 9:56 pm
- Has thanked: 2 times
- Been thanked: 4 times