Fudge modchips

Post by **Roofus** » Tue Jan 20, 2004 2:38 pm

My XBox modchip didn't work, so I had my buddy solder the points on the motherboard to flash the TSOP. What's the easiest, most straight-forward to do the actual flashing?

az_bont · Post by **az_bont** » Tue Jan 20, 2004 2:39 pm

Not bother and use an exploit?

Post by **Roofus** » Tue Jan 20, 2004 2:41 pm

I've been looking into that too. Can you recommend one?

az_bont · Post by **az_bont** » Tue Jan 20, 2004 2:43 pm

I've done the font exploit on a mate's Xbox and it worked absolutely brilliantly with Phoenix BIOS Loader 1.6. Apaarently there's still the chance of being stuck in the clock loop, though, but not with the audio exploit, which can now be configured to boot EvoX on boot-up.

Nyarlathotep · Post by **Nyarlathotep** » Tue Jan 20, 2004 3:00 pm

Hows about using the exploit to flash the modchip?

A-HA!

atf487 · Post by **atf487** » Tue Jan 20, 2004 3:05 pm

Phoenix 1.6?

I'm pretty sure its only up to 1.3.5i, which is for the 1.3 and up boxes.

I bought a modchip, but I bought the wrong kind of solder, and I dunno if my iron would work. So I just sent it to some guy to put the mechassaultwithevox save on it.

I still don't see how PBL has a major advantage. Sure, you don't have to sign things, but if eject still resets, it really doesn't matter, IMO.

az_bont · Post by **az_bont** » Tue Jan 20, 2004 3:13 pm

Oh yeah, I was confusing it with the Gamecube loader

.

zero · Post by **zero** » Tue Jan 20, 2004 3:14 pm

Well, i used PBL1.3i on my friends xbox, i can't remember what bios i used but im pretty sure it was the latest (at the time) xecuter 2 bios, and it worked great, (i used the font exploit btw), and when he starts up his xbox and hits open on his driver door it doesn't reset, cos you can't start a back up dvd/cd-rom, until the pbl loads, and then and only then you can put in the backed up dvd/cd, otherwise it just gives an error.

BTW, does anyone know if PBL1.3.5i works with version 1.0 xbox's too??.

Wagh · Post by **Wagh** » Tue Jan 20, 2004 8:51 pm

Dr Wily wrote:Hows about using the exploit to flash the modchip?

I wanted to do that... you got any links on how to?

Post by **Roofus** » Tue Jan 20, 2004 10:18 pm

Dr Wily wrote:Hows about using the exploit to flash the modchip?

A-HA!

The chip seems to be dead.

atf487 · Post by **atf487** » Wed Jan 21, 2004 3:18 pm

zero wrote:Well, i used PBL1.3i on my friends xbox, i can't remember what bios i used but im pretty sure it was the latest (at the time) xecuter 2 bios, and it worked great, (i used the font exploit btw), and when he starts up his xbox and hits open on his driver door it doesn't reset, cos you can't start a back up dvd/cd-rom, until the pbl loads, and then and only then you can put in the backed up dvd/cd, otherwise it just gives an error.

BTW, does anyone know if PBL1.3.5i works with version 1.0 xbox's too??.

Ahh, I just read that it works with the audio exploit too, but not the gamesave (which is what I was using)

perry · Post by **perry** » Wed Jan 21, 2004 3:30 pm

I used phoenix 1.3 BIOS, w/ B&E Reloaded. Runs sweet. No probs so far..

Post by **melancholy** » Wed Jan 21, 2004 10:53 pm

What do you need to put an exploit on an Xbox? Do I have to buy anything extra to do it?

area · Post by **area** » Thu Jan 22, 2004 12:25 am

One of:

Action Replay

OR

Xbox Controller - USB cable (i.e. lets it plug into your PC) and a memory card.

Plus one of:

007 Agent Under Fire

Mechwarrior

For the gamesave exploits. I haven't used the Audio exploit, so I don't know what you need for that. http://www.xbox-scene.com should have all the necessary information.

theultimatechuff · Post by **theultimatechuff** » Thu Jan 22, 2004 9:57 am

another way to get the gamesave over is via a mem card and someone with a modded xbox. Get them to ftp the save over and then copy it to the mem card with the MS dashboard.

Post by **Roofus** » Thu Jan 22, 2004 12:54 pm

Xbox Controller - USB cable (i.e. lets it plug into your PC) and a memory card.

What do you need to do that?

az_bont · Post by **az_bont** » Thu Jan 22, 2004 1:31 pm

Roofus wrote:
Xbox Controller - USB cable (i.e. lets it plug into your PC) and a memory card.

What do you need to do that?

An Xbox controlelr extension cable and a normal USB cable that has the rectangular connection on one side.

atf487 · Post by **atf487** » Thu Jan 22, 2004 1:53 pm

az_bont wrote:
Roofus wrote:
Xbox Controller - USB cable (i.e. lets it plug into your PC) and a memory card.

What do you need to do that?
An Xbox controlelr extension cable and a normal USB cable that has the rectangular connection on one side.

or just buy one at http://secure.llamma.com/catalog/produc ... ucts_id=78

Polymira · Post by **Polymira** » Thu Jan 22, 2004 8:38 pm

Well, the exploits work great (meaning bios loaders), BUT... only one issue. They take a bit longer to boot then a mod/flashed tsop.

It takes about 15 minutes to open up the xbox, solder 2 points, and flash the bios alla 007/MS/SC/etc.

SadisticSaviorX · Post by **SadisticSaviorX** » Fri Jan 23, 2004 11:05 pm

how can you get the pc to read a xbox memcard on a controller?