p4 motherboard in g3 case

Discuss modifications you have done or plan to do to your Dreamcast or any other hardware, or discuss devices you want to build. If your console does not work or is acting up, ask about fixing it in here.
Post Reply
User avatar
SuperMegatron
DCEmu User with No Life
DCEmu User with No Life
Posts: 3523
https://www.artistsworkshop.eu/meble-kuchenne-na-wymiar-warszawa-gdzie-zamowic/
Joined: Fri Aug 16, 2002 8:47 pm
Has thanked: 0
Been thanked: 0

p4 motherboard in g3 case

Post by SuperMegatron »

ok I got this motherboard GIGABYTE GA-8I845GVM-RZ 845GV and a celeron 2.8 ghz. The board will fit in the case but I dont think the cpu's heatsink and fan will so I need another option for that. I also was wondering if there is a pin out diagram for the power switch. I cant seem to find one.
Top
User avatar
semicolo
Mental DCEmu
Mental DCEmu
Posts: 328
Joined: Mon Apr 25, 2005 1:02 pm
Location: Three-rivers canada
Has thanked: 0
Been thanked: 0
Contact:
Contact semicolo

Post by semicolo »

just use a push button for the power switch (normally open, closed when pushed, open again when released)
Top
User avatar
ptr.exe
Insane DCEmu
Insane DCEmu
Posts: 204
Joined: Thu Apr 07, 2005 10:24 am
Has thanked: 0
Been thanked: 0

Post by ptr.exe »

Do you mean a pinout of the connections on the motherboard that are connected to the switches on the front of the case? If so then there will be a pinout of them in the mobo's manual if it doesnt use a standard connecter.
Orange_Ribbon wrote:It is also the reason why you can't wear tight pants. Damn anal warts.

Millenium Falcon Dreamcast
Top
Post Reply

Return to “Hardware Modification and Repair”