I know MR. DNS and DR. DNS use both Port 53 (UDP) So if you haven't opened that already, then that may be worth a try. For me, when I run MR DNS (because I hate DR. DNS), it never closes after I or someone else connects through it. I think you should consider contacting your ISP to see if they can ...

*New update* (Still hanging in the lobby after tunneling) Seems like i have everything hooked up right. Gamecube - PC with crossover - bridged with wireless connection. Used the PSO_DNS file and the MR_DNS file to get the same results of hanging above the lobby. Gamecube settings are manually set to...

If you're looking to try your own DNS server, I actually wrote one of those for PSO, if you want to try it out... I'm assuming your PC runs Windows here (if not, then I can give you instructions for how to build the DNS server from source)... Grab this file and this file and put them in the same di...

If you're looking to try your own DNS server, I actually wrote one of those for PSO, if you want to try it out... I'm assuming your PC runs Windows here (if not, then I can give you instructions for how to build the DNS server from source)... Grab this file and this file and put them in the same di...

The way that I set it up is to plug an ethernet crossover cable into my gc and run the other end into my laptop. I do not know if a normal cat5 Ethernet cable will work. Sorry, I never tested that. Then I open the Network and Sharing Center in the Control Panel (Windows 7 here, but XP and Vista are...

https://dcemulation.org/phpBB/viewtopic ... 5&t=102260

Abvove is the link to the thread where the op was having problems using comcast

*update 2* Welp looks like im probably out of luck. I tried a new router to piggyback off of my comcast wifi modem to no avail. Still does the same thing, just hangs in the lobby with music. Im chalking ot up to comcasts router trying to locate a dns thats different than where i told it to connect t...

*Update* Kayak spent a lot of time helping me try to connect but there is something that is just preventing me from completing the connection. Going to try a new router to see if there are some more options that my comcast router does not provide. Big thanks to kayak for helping me !! Hope to try ag...

I can see on my router status that my gamecube bba is connected as online with its mac address as a moca connection but that makes no sense to me as moca is disabled.

Still cant connect

At this point im offering a handsome reward if you can take some time out of your busy day to help me connect. Pm me if we can somehow do this over the phone.

Any help would be extremely appriciated.

Do i need to enable moca connection on my router?

If your router is 10.0.0.1, then you should probably give your Gamecube an IP like 10.0.0.222 (I think most Comcast routers assign IP addresses out of a fairly low range in the network). You'll want to set the netmask to 255.255.255.0 and the Gateway to 10.0.0.1 (Gateway == the router). Yes, you'll...

After checking my router to find my dhcp ranges i set manual ip settings as followed Ip address - 10.0.0.254 (just outside the range by 1) Subnet mask - 255.255.255.0 Default gateway - 10.0.0.1 (ipv4 gateway address) Primary dns - 138.197.20.130 (sylverant) Secondary dns - blank Now with this method...

If that doesn't work, you can try using static IP with your GC. Look at the DHCP range on your router, and set the IP of your GC so that the first 3 digits match the numbers of the router's DHCP range, but set the last number to be outside of the range the router is using, e.g. if the router says D...

Error 100 is definitely a client-side issue (that's to say, it never makes the connection to the server at all)... I assume that by using the defaults, you mean that you have it set up to use DHCP? Hopefully it's not the case, but sometimes cable modem/routers don't seem to like Sega's DHCP code......

Error 100 is definitely a client-side issue (that's to say, it never makes the connection to the server at all)... I assume that by using the defaults, you mean that you have it set up to use DHCP? Hopefully it's not the case, but sometimes cable modem/routers don't seem to like Sega's DHCP code......

Hello everyone, im interested in playing on the sylverant server. It seems I have everything setup right and have done everything the page says on how to connect with gamecube. My problem is the game will say connecting to dns and just sit in the lobby until it times out with an error 100. In my set...