thinkin about building portable n64
- nevets934
- Insane DCEmu
- Posts: 164
- https://www.artistsworkshop.eu/meble-kuchenne-na-wymiar-warszawa-gdzie-zamowic/
- Joined: Wed Aug 04, 2004 8:52 am
- Has thanked: 0
- Been thanked: 0
thinkin about building portable n64
i'm thinkin about building portable n64. does any one no where i can find a tut that i can use as an example? how much do you think it would cost to make? the main problem i am gonna have making this is i have no idea how i'm gonna make the case for it any suggestions? this is my last question was the later made n64's smaller than the first ones that came out? i no that the newer dc's were smaller but i donno about n64's.
-
- DCEmu Veteran
- Posts: 4306
- Joined: Sat Nov 30, 2002 7:01 pm
- Location: San Jose
- Has thanked: 0
- Been thanked: 0
- Contact:
lol i'm asking you if the later ones were smaller. and thats a good idea thanks! so far all i have done is planned put the thing. i still need to buy a psone screen and if the newer n64's are smaller i'm gonna buy one of those too.
EDIT: how can i open the n64 it has these weird screws in it. i'v seen online that there are special screwdrivers that would work but is there anyway to open it without buying a special screwdriver?
EDIT: how can i open the n64 it has these weird screws in it. i'v seen online that there are special screwdrivers that would work but is there anyway to open it without buying a special screwdriver?
- Quzar
- Dream Coder
- Posts: 7499
- Joined: Wed Jul 31, 2002 12:14 am
- Location: Miami, FL
- Has thanked: 4 times
- Been thanked: 10 times
- Contact:
pen trick. search for it on the forums, someone made a nice tut for doing it a while ago. it involves melting a cheap plastic pen, and shoving it in there to mold it to the screw.nevets934 wrote:lol i'm asking you if the later ones were smaller. and thats a good idea thanks! so far all i have done is planned put the thing. i still need to buy a psone screen and if the newer n64's are smaller i'm gonna buy one of those too.
EDIT: how can i open the n64 it has these weird screws in it. i'v seen online that there are special screwdrivers that would work but is there anyway to open it without buying a special screwdriver?
"When you post fewer lines of text than your signature, consider not posting at all." - A Wise Man
-
- DCEmu Veteran
- Posts: 4306
- Joined: Sat Nov 30, 2002 7:01 pm
- Location: San Jose
- Has thanked: 0
- Been thanked: 0
- Contact:
- kingbuzzo
- Insane DCEmu
- Posts: 299
- Joined: Tue Jul 13, 2004 2:02 am
- Location: Ottawa
- Has thanked: 0
- Been thanked: 0
- Contact:
nice
now nothing will stand in your way!
here's a few tips from a guy who doesn't know anything
make sure you use a psone screen that supports rgb
check out that guy dave's site, he has some links to how you can make your own vaccum forming table. I don't know if you'll make it since it takes up a lot of room, and will take more time to make than the N64p.
vaccum forming is really the only way to go. Anything else is just a messy rat nest that will let you play pokemon snap in the most painful way possible.
All the information you'll need will be found at http://www.gamesx.com
good luck!
here's a few tips from a guy who doesn't know anything
make sure you use a psone screen that supports rgb
check out that guy dave's site, he has some links to how you can make your own vaccum forming table. I don't know if you'll make it since it takes up a lot of room, and will take more time to make than the N64p.
vaccum forming is really the only way to go. Anything else is just a messy rat nest that will let you play pokemon snap in the most painful way possible.
All the information you'll need will be found at http://www.gamesx.com
good luck!
-
- Somewhat Dumb Knight
- Posts: 3653
- Joined: Tue Oct 12, 2004 2:26 pm
- Has thanked: 0
- Been thanked: 0
umm, go to http://benheck.com/ipw-web/bulletin/bb/ ... um.php?f=5
just dont go to the main board. it tries to install something so you should use either prevx or norton to stop it. its a good site, though.
also, http://www27.brinkster.com/ninja13/n64/ . If you cant find an answer at that forum, you should go to the second site.
No n64 has ever been smaller but you can use the second link to compact it.
Good Luck.
just dont go to the main board. it tries to install something so you should use either prevx or norton to stop it. its a good site, though.
also, http://www27.brinkster.com/ninja13/n64/ . If you cant find an answer at that forum, you should go to the second site.
No n64 has ever been smaller but you can use the second link to compact it.
Good Luck.
- Zealous zerotype
- zerotype
- Posts: 3701
- Joined: Wed Aug 13, 2003 7:11 pm
- Location: Nashville,TN
- Has thanked: 0
- Been thanked: 0
i think it'd be pretty easy becuase they are small just need a screen and build a controler on it infavct I might give it a go!
SCO=SCUM=M$=SCO it keeps repeating
i'm a randite
DYTDMFBSB?
There must have been some mistake
I'm not the one who should be saved
My divinity has been denied
Mary and me were both fucked by God
i'm a randite
DYTDMFBSB?
There must have been some mistake
I'm not the one who should be saved
My divinity has been denied
Mary and me were both fucked by God