Japan Dreamcast Controller port in US model?

Discuss modifications you have done or plan to do to your Dreamcast or any other hardware, or discuss devices you want to build. If your console does not work or is acting up, ask about fixing it in here.
Post Reply
back2bean
DCEmu Newbie
DCEmu Newbie
Posts: 4
https://www.artistsworkshop.eu/meble-kuchenne-na-wymiar-warszawa-gdzie-zamowic/
Joined: Tue Mar 15, 2016 11:42 am
Has thanked: 0
Been thanked: 0

Japan Dreamcast Controller port in US model?

Post by back2bean »

Will a Japan model controller port work in my american US model DC?
User avatar
BlueCrab
The Crabby Overlord
The Crabby Overlord
Posts: 5652
Joined: Mon May 27, 2002 11:31 am
Location: Sailing the Skies of Arcadia
Has thanked: 9 times
Been thanked: 69 times
Contact:

Re: Japan Dreamcast Controller port in US model?

Post by BlueCrab »

There's no hardware-enforced region locking on any peripherals for the Dreamcast. There's no reason a plain controller from one region would not work in another region.


Note: The Japanese light gun does not work with official US lightgun games. There's no hardware reason for it -- it is solely a software-based lockout that was based on the decision by Sega of America not to bring out a lightgun in the US after the Columbine school shooting occurred. There are 3rd party lightguns that work just fine, though.
back2bean
DCEmu Newbie
DCEmu Newbie
Posts: 4
Joined: Tue Mar 15, 2016 11:42 am
Has thanked: 0
Been thanked: 0

Re: Japan Dreamcast Controller port in US model?

Post by back2bean »

Not the controller, the controller port
http://www.ebay.com/itm/Sega-Official-D ... Track=true

thanks for the reply
back2bean
DCEmu Newbie
DCEmu Newbie
Posts: 4
Joined: Tue Mar 15, 2016 11:42 am
Has thanked: 0
Been thanked: 0

Re: Japan Dreamcast Controller port in US model?

Post by back2bean »

anyone? Or by hardware were you meaning internals too?
User avatar
BlueCrab
The Crabby Overlord
The Crabby Overlord
Posts: 5652
Joined: Mon May 27, 2002 11:31 am
Location: Sailing the Skies of Arcadia
Has thanked: 9 times
Been thanked: 69 times
Contact:

Re: Japan Dreamcast Controller port in US model?

Post by BlueCrab »

Oh... The board itself...

As long as it came from a Dreamcast with the same number of pins on the fan connector, it should be fine, I'm pretty sure. Just make sure you have the same number of pins on the fan connector (that one looks like a 3 pin model) and you should be good to go.

Note: I've never tried using one from a different region system myself, but considering there's not really any logic on the board itself, I can't see it being a problem.
back2bean
DCEmu Newbie
DCEmu Newbie
Posts: 4
Joined: Tue Mar 15, 2016 11:42 am
Has thanked: 0
Been thanked: 0

Re: Japan Dreamcast Controller port in US model?

Post by back2bean »

thanks again for the reply, I asked the seller and he said it will work....so I purchased it and now I wait for it to get here so i can put err in. I hope it works. I will reply back when I put it in the Dreamcast to let everyone know.
Post Reply