no power after running wire

Discuss modifications you have done or plan to do to your Dreamcast or any other hardware, or discuss devices you want to build. If your console does not work or is acting up, ask about fixing it in here.
Post Reply
david watters
DCEmu Newbie
DCEmu Newbie
Posts: 1
Joined: Thu Apr 12, 2012 10:44 pm

no power after running wire

Post by david watters » Thu Apr 12, 2012 10:53 pm

i was told to run this wire so i could write to the bios http://www.made-by-bacteria.com/viewtop ... f=85&t=516

so i soldered it up and went to power the dreamcast on and no it doesnt do anything other than the power light comes on....disc doesnt spin, nothing on screen

sad thing is this system worked 100% b4 doing that wire mod...im not sure if it was the power wire going into the power supply or not but i believe when i plugged it in i heard a pop.

any help at all guys? i reall dont want to have a dead dreamcast
Post Reply