Making a custom Coders Cable.
-
- DCEmu Newbie
- Posts: 1
- https://www.artistsworkshop.eu/meble-kuchenne-na-wymiar-warszawa-gdzie-zamowic/
- Joined: Wed Mar 12, 2014 5:10 pm
- Has thanked: 0
- Been thanked: 0
Making a custom Coders Cable.
At the suggestion of Blue Crab I am attempting to make a Coders Cable using an hdmi port and a USB to Serial converter board. I have the cable completly stipped and the board is in transit. My problems is that I am unsure of how to encase the contacts when I put everything together. I have included pics of my build so far. Any help or suggests would be great.
- BlueCrab
- The Crabby Overlord
- Posts: 5652
- Joined: Mon May 27, 2002 11:31 am
- Location: Sailing the Skies of Arcadia
- Has thanked: 9 times
- Been thanked: 69 times
- Contact:
Re: Making a custom Coders Cable.
The longer side of the HDMI connector has the same number of pins and spacing as does the Dreamcast serial port. It isn't a perfect fit, and requires some work (cutting off the bottom of the connector, for instance), but it should work just as well as any of the other jerry-rigged solutions for getting a plug.