Hi everybody,
I have a little annoying thing : I use a CD ROM disc on my Dreamcast to boot with DC TOOL Serial.
Then, sometimes, I need to change the disc (the DC Load boot one) with other disc (a data disc) to load data for testing purpose.
But when I change the disc and close the lid, Dreamcast try to interpret the disc and to boot it.
All I want is just could access data on the other disc without loosing DC Load server on Dreamcast.
Is there something to fix it ?
Thanks for help.
About swapping disc / DC load serial
- Newbie
- Insane DCEmu
- Posts: 171
- https://www.artistsworkshop.eu/meble-kuchenne-na-wymiar-warszawa-gdzie-zamowic/
- Joined: Sat Jul 27, 2013 1:16 pm
- Has thanked: 0
- Been thanked: 0
- BlueCrab
- The Crabby Overlord
- Posts: 5660
- Joined: Mon May 27, 2002 11:31 am
- Location: Sailing the Skies of Arcadia
- Has thanked: 9 times
- Been thanked: 69 times
- Contact:
Re: About swapping disc / DC load serial
dcload-serial doesn't do anything with the disc drive, so you should just be able to swap out the disc while it is running (before starting to upload your testing binary, for instance).
I've done this plenty of times before for testing my code, so I know it should work just fine. If it doesn't, then there's gotta be something wonky with your copy of dcload-serial...
I've done this plenty of times before for testing my code, so I know it should work just fine. If it doesn't, then there's gotta be something wonky with your copy of dcload-serial...