That's a really unique idea. If you did it right, you could also make a tray to eject each one like those stereo Cd recorders with 2 or 3 even 4 or 5 different cd trays that come out like the PS2.
----- Tray 1
----- Tray 2
----- Tray 3
----- Tray 4

The rumble pack is a Naki brand. I am not going to buy another one, and the controller is just fine. What do I need to reapair? I've already got to buy a new controller board, and fan assembly.

I REALLY need a DC controller port, and fan assemnbly. Used or working, just need one. I don't need the ribbon, but that would be nice. $20 is all I can offer. I would also like a clear blue case. I will give $8 for one of those. Please help someone in need if you have one. I am NOT paying $30-40 fo...

After a while of playing ANY game with a lot of rumble, the controllers 4 buttons on the right stop working, and the directional pad thinks I holding down the left, when I'm not. So a character in the game would keep turning left, until I press right, then he just stops. Soon as I let go, he starts ...

Is this the resistor marked F1 on the board? What kind of resistor is it?

No. I meant where the pins were soldered on to the motherboard from inside the system. Not what they were from outside. I need to solder left and right audio wires for my small radio mod. Original idea!

But, I don't want to kill the power all the way, I want all the lights, yes LIGHTSSSSSSS, to stay on while the button is being pressed. Just like the PS'. The lights stay on, but it only kills power to motherboard. How can I connect just to motherboard. By putting the switch directly onto the power ...

You can install a small radio, with the headphone jack connected to the left and right audio out via wire. Put a switch in front to control power, use the 3.3 volt out on power board for radio's power, and controlling the tuning will be different, but I would make it so the tuning buttons actually w...

I need to know what the PS2's AV OUT points are. In other words, which ones are left audio, and which 2 points are right audio. I need to know!

I have a 4 prong reset button from an old psx power board. I want to install a reset button that when pressed, just kills power, but when released turns power right back on. Now, the 4 prongs are what's messing with my head. If it just had 2 prongs, I could just cut the power cord to the power butto...

I just want it to! It will give me a challenge, something to keep me busy, and would look cool. Ohh well, I've already spliced the wire up, and positioned the LED where I want it, so I will add it anyway. Thanks for the help. Here are all my mods just to ONE DC console! You can see it at http://djky...

Does the LED flicker when recieving data, or does this mod just light up an LED not stop like plugging an LED into the 3.3 volt spot on the power board? I need it to flicker! Seriously!

I need a guide or close-up pictures of where to connect an led to the DC's modem for activity. I have a 3 volt led from old psx power board.

I have installed an LED into my DC controller. Same color as DC's orange LED, and takes a few seconds to initialize after turning power on to DC. I have also inserted 2 12 volt lights be CD in my DC. Clear top makes it look cool at night. You should try those. Visit my site to see pics. http://djky2...